Описание на продукта
Styrene-free, vinyl ester composite mortar for spread-free anchoring of high loads with threaded anchor rods. Side-by-side (shuttle) cartridge, including one mixing tube FIS MR P, to be worked with the pressing gun, type FIS DM S Pro.
European Technical Assessment for cracked and uncracked concrete, as well as for masonry. Fire protection characteristic values with transile and transverse loads under fire exposure up to 120 minutes.
Installation temperature during processing ‒10 °C to +40 °C.
The injection mortar hasva European Technical Assessment (ETA) for cracked and uncracked concrete, as well as for masonry of full or hollow brick. The mortar is earthquake-proof according to performance category C1 and approved in terms of fire protection for concrete and masonry with the fire -resistance class up to 120 minutes.
The injection mortar is applied with the pressing gun, type VM-P 345 Profi, or with a standard silicone press.
The substrate temperature during processing must be –10 °C to +40 °C (concrete) and the ambient temperature after complete hardening –40 °C to +120 °C (in concrete).
The mortar will keep for at least 18 months if stored in a dark, cool and dry place.
